Industrial Spray Lubricants

SWEPCO 801 Clear Penetrating Lubricant

SWEPCO 801 Clear Penetrating Lubricant is a premium quality penetrating oil and lubricant. Use it for loosening frozen and corroded bolts, nuts, screws, clamps and other threaded parts.

Also good for pins and hinges and other parts that need disassembly. Just spray it on and let it go to work dissolving and loosening rust, corrosion and crud of all kinds. Super fast penetration means more work gets done with less wait time. And the clear formula means less clean-up. After disassembly and reassembly, spray parts to help prevent future rust and corrosion.

SWEPCO 802 Open Gear Lube

Makes open gear lubricating a clean job

Lubricating open gears is often an unpleasant, messy job involving a bucket of sticky grease, a paddle and sometimes even heat to thin the lubricant. No more with SWEPCO 802 Open Gear Lube. Forget about the application tools, the heat, the mess to clean up, the danger of slippery and greasy floors and machines. Now, just press the button of the convenient aerosol can and without mess or fuss you have quick, clean, sure lubrication.

Tough film reduces wear

SWEPCO 802 contains a special extreme pressure additive that passed the 4-gram Timken Load Test (43-lb. lever arm for 30 minutes). SWEPCO 802 puts a tough film on gears that resists heavy loads, reduces metal-to-metal contact, helps prolong gear life and helps reduce noise.

Stays put

Unlike heavier grease that will fling off from its own weight, SWEPCO 802 won’t fling or drip off. And with the SWEPCO spray method, you can reach right down in between the gear teeth and touch up bare spots without relubricating the whole machine. This all helps to eliminate waste and mess.

All-purpose, all-temperature

The use of 802 is profitable for any open gear application such as shovels, draglines, gears, asphalt rollers, winches, cables, cams and drill rigs. It’s an all-temperature lubricant which resists extreme cold, but also has a high melting point of over 200°F. This wide temperature range puts an end to dry gear starts.

FEATURES

• High melting point
• Excellent cold temperature performance
• Won’t fling or drip off

SWEPCO 803 Chain & Cable Lubricant

Helps prolong life of chains and cables

Placing a film of lubrication on the surface of today’s high-tension chains and cables simply doesn’t get the job done. That’s why you need SWEPCO 803 Chain & Cable Lubricant! It penetrates deep into links and strands to help to eliminate internal wear and friction, a major cause of cable and chain fatigue and failure.

Contains graphite

SWEPCO 803 contains graphite which helps provide long lasting, superior lubrication of costly chain and cable installations.

Even film lubrication plus deep penetration = no rust & dirt

An even film lubrication over the entire chain or cable surface helps protect against rust and friction, which helps eliminate two of the most common causes of chain and cable failure.

Features

• Superior penetration prevents wear
• Contains graphite
• Resists wear and friction
• Does not drip or run

SWEPCO 808 Penetrating Oil

Cuts rust, paint, dirt, grease and corrosion fast

SWEPCO 808 goes to work to loosen frozen parts, dissolve rust and provide a firm surface for tools. Special high-pressure construction means SWEPCO 808 penetrates deep and fast to get to the problem with a minimum of time.

Made of the finest raw materials

SWEPCO 808 is superior because it is a scientific blend of the finest available oils, solvents, wetting agents and Moly. SWEPCO 808 has been formulated to conveniently meet the most demanding professional needs at no additional cost.

Features

• Dissolves rust
• Effective on hot or cold surfaces
• Penetrates deep
• Contains Molybdenum Disulfide

SWEPCO 812 Moly Dry Lube

Superior lubrication – Use where oil or grease is not desirable

SWEPCO 812 is a specially formulated “dry” lubricant. Its carrier agent evaporates almost instantly, leaving the remaining “dry’’ lubrication.

SWEPCO 812 is formulated with Moly, the best lubricant available. In addition, dirt and foreign particles cannot adhere to this lubricant; thus, better lubrication and less wear for surfaces exposed to such contaminants. It can be used at higher temperatures than conventional greases. And SWEPCO 812 outlasts ordinary lubricants.

Won’t drip or run off

SWEPCO 812 dry film means no waste or drippage. Saves money and time.

All-purpose

SWEPCO 812 is recommended anywhere conventional grease or oil is not desirable. For chains and sprockets, sliding surfaces, rollers and conveyors, door locks and hinges, and many other applications.

Features

• Superior lubrication
• Will not drip or run off
• All purpose lubricant
• Use where oil or grease is not desirable

SWEPCO 815 Food Machinery Grease

SWEPCO 815 provides superior protection in applications requiring a USDA/NSF H1 or CFIA “n” rated grease where incidental food contact might occur.

SWEPCO 815 is formulated for excellent pumpability, high temperature performance, acid & corrosion resistance and resistance to water wash out. And superior lubricity reduces energy consumption in heavily loaded processing lines.

SWEPCO 815 is great for quick touch-ups and difficult lube points.

SWEPCO 816 Food Grade Silicone Spray

SWEPCO 816 Food Grade Silicone Spray is a premium quality pure silicone NSF H-1 lubricant suitable for use where the possibility of food contact exists in federally inspected food and beverage plants. It prevents sticking of both moving and non-moving parts.

Use it for decreasing friction on food machinery parts, preparation tables and packaging equipment. Helps prevent food from sticking to nozzles, knives, preparation tables and other food machinery surfaces. Highly recommended for use on chutes, bins, prep tables, conveyors, locks, freezer trays, baking containers, belts, chains, rollers, rails, knives, filler tubes, nozzles, processing equipment and other metal, plastic, vinyl, rubber, leather or wood surfaces for a non-stick surface.

SWEPCO 818 Food Grade Penetrating Lubricant

SWEPCO 818 Food Grade Penetrating Lubricant is a premium quality penetrating oil and lubricant suitable for use where the possibility of incidental food contact exists in federally inspected food and beverage processing plants. Use it for loosening frozen and corroded bolts, nuts, screws, clamps and other threaded parts. Also good for pins, hinges, chains and other sliding or rubbing parts. Just spray it on and let it go to work dissolving and loosening rust, corrosion and crud of all kinds. Quick penetration means more work gets done with less wait time. And the clear formula means less clean-up. After disassembly and reassembly, spray parts to help prevent future rust and corrosion.