Greases

SWEPCO 115 Food Machinery Grease

SWEPCO 115 was formulated specifically to meet USDA 1998 H-1 Guidelines and Canadian Health requirements for a grease capable of incidental contact in food and beverage processing industries. This high performance aluminum complex grease is ideal for use on high speed can seamers, juice extractors, filling equipment, labelers, packaging machinery, peelers, shaker screens, conveyors, valves, bread wrappers, meat cutting equipment and other food processing and packaging machinery. High and low temperature performance are superior to ordinary aluminum, lithium or calcium base food machinery greases. It also stays where you put it, providing long lasting service, extended greasing intervals and reduced grease consumption.

• Especially formulated for can seamers, juice extractors, filling equipment, labelers, packaging machinery, peelers, shaker screens, conveyors, valves, bread wrappers, meat cutting equipment and many other applications
• Excellent resistance to pounding or slinging out
• High dropping point of 482°F (250°C)
• Exceptional resistance to water washout
• Highly acid and corrosion resistant
• Excellent thermal and oxidation stability
• Excellent pumpability
• Available in tubes, pails, kegs & drums

Features

• NSF “H-1” registered
• Excellent high temperature performance
• Excellent low temperature pumpability and performance
• Superior water wash-out resistance
• Superior acid resistance
• Excellent rust and corrosion characteristics

SWEPCO 116 Is Designed To Work Where Other Food Grade Greases Fall Short.

SWEPCO 116 will carry the loads found in pellet mills, grinders, lifts and other high pressure applications. The wide operating temperature range of SWEPCO 116 makes it ideal for working in refrigerated areas as well as oven and cooking applications. SWEPCO 116 has great water resistance so it will not wash out during daily wash downs and clean ups. The 116 calcium sulfonate thickener provides exceptional extreme pressure performance, load carrying, wear resistance and corrosion resistance.

With the NSF H-1 approval and exceptional performance SWEPCO 116 Ultra EP Food Machinery Grease is ideal for use throughout the plant. SWEPCO 116 will help reduce the number of greases needed and lubrication errors. It can be used above and below the line in food processing applications that require food grade grease. From forklifts to pellet mills, and grinders to conveyors, SWEPCO 116 is your problem solver for many applications.

• USDA “H-1” approved
• Excellent resistnce to pounding or slinging out
• High dropping point to 600 degrees fahrenheit
• Superior resistance to water washout
• Highly acid and corrosion resistant
• Excellent thermal and oxidation stability
• Excellent pumpability

SWEPCO 121 Tri-Plex Universal Grease

is a multi-service grease that provides superior resistance to heat, shock, water and extreme pressure in a wide range of applications. It makes bearings run longer, cooler, smoother, quieter and more efficiently and increases both bearing life and equipment reliability.

SWEPCO 121 is a high performance grease based upon SWEPCO’s new, proprietary “Tri-Plex” chemistry … an important advancement that produces a tighter molecular structure. This improvement and special polymer modification enhance a wide range of performance properties, including … resistance to shearing, shock, high temperature oxidation, bleeding and water wash out. Combine enhanced performance in these critical areas with SWEPCO’s advanced EP performance, rust and corrosion protection and you have a new class of multi-service grease which lasts significantly longer and provides superior lubrication in the broadest possible range of applications.

• Proprietary “tri-plex” chemistry and high performance polymers
• Wide temperature range of -40° to 450°F intermittent (-40°C to 268°C)
• Unmatched shear stability for longer working life
• Exceptional shock resistance
• Highly resistant to high temperature bleeding and oxidation
• Excellent low temperature pumpability
• Won’t wash or spray off
• Lowers bearing temperatures; reduces vibration
• Superior EP performance
• Environmentally responsible
• For all types of bearings and grease points

SWEPCO 123 Ultra Ep Multi-service Grease Is A Premium High Pressure Gun Grease.

It has been specifically formulated to provide the extra protection required in high load, high heat extreme pressure applications like those commonly found in steel, construction, mining, paper, plastic, glass, brick and ceramics industries.

• Advanced overbased complex calcium sulfonate gelling chemistry
• Delivers exceptional EP characteristics without the addition of other additives
• Superior heat and wear resistance
• High loading or pressures resistance
• Protects metal surfaces from damaging metal to metal contact
• Excellent water and corrosion resistance
• Inherently high dropping point of 580°F (300°C)

SWEPCO 155 is specifically designed for couplings, spindles, and other high-speed applications.

This unique formulation works to prevent corrosion, wear, and fretting wear due to vibrations. A special oil/polymer blend prevents oil bleed from centrifugal forces found in couplings and other high-speed equipment.

Your number one choice for lubricating couplings of various designs and applications.

• Special polymer/oil blend to control bleed.
• Superior anti-wear properties with added protection against fretting wear.
• Excellent Extreme Pressure properties to prevent damage from shock loading and hard or cold starts.
• Stands up to centrifugal forces.
• Resists oxidation for longer life and performance.
• Helps reduce maintenance cost and downtime.
• Can extend lubrication intervals in most cases.
• Usable up to 260°C (500°F), wide operating temperature range.
• Can be used in food plants where there is no possibility of contact with food.
• ompatible with most seals, spacers, metals and other materials.
• Resists separation for extended lubricant life.
• High Viscosity Index blend controls consistency changes with temperature fluctuations.

SWEPCO 165 MolyXP Extreme Pressure Grease

SWEPCO 165 Extreme Pressure GREASE is a high performance multi-service lubricant

SWEPCO 165 is formulated to deliver unsurpassed protection and sealing of a wide range of process, distribution and control valves. SWEPCO’s Syntheon synthetic base stocks, over-based calcium sulfonate base and advanced additive chemistry, such as Moly and Lubium II, provide superior lubrication, wear resistance, corrosionnd rust resistance and sealing for all types of industry valves…including those used in caustic chemical, abrasive, high pressure and high temperature service. Insure proper functioning, longer life and less valve-related downtime of your valves with SWEPCO 165.

• Helps protect metal seated valve surfaces from wear caused by metal to metal contact and abrasive materials
• Recommended for manual and servo operated gate, ball, and other types of process, control and distribution valves
• Prevents leaks, entry of abrasives and loss of operating pressures
• Excellent protection from corrosion caused by water, alcohols, glycols, CO2, H2S, and other solvents and caustic chemicals
• Compatible with all commonly used seal materials

SWEPCO 164 Ultra Ep Open Gear Lube Has Been Specifically Formulated

SWEPCO 164 Ultra EP was formulated to meet the unique challenges of lubricating a wide range of exposed gears including swing gears on cranes, ring gears on rotary kilns, gearing on draglines and in quarries, foundries and many other operations.

Superior protection for heavily loaded exposed gearing

Advanced overbased complex calcium sulfonate gelling chemistry delivers exceptional load carrying characteristics. This state-of-the-art gelling system also yields superior mechanical stability, an inherently high dropping point, reduced wear and excellent resistance to water and corrosion.

• Advanced overbased complex calcium sulfonate gelling chemistry delivers exceptional load carrying performance
• Superior mechanical stability and shear resistance
• Inherently high dropping point of 580°F (300°C)
• Excellent water and corrosion resistance
• Unmatched adhesion to metal surfaces

SWEPCO 113 Moly Fluid Grease

• Superior resistance to water washout
• Clings & penetrates to reduce wear
• Excellent all-temperature pumpability & performance
• Exceptional versatility

SWEPCO 113 Moly Fluid Grease combines the excellent lubrication characteristics of SWEPCO’s calcium based fluid grease with the unsurpassed protection of Moly… Molybdenum Disulfide. Fluid grease users can now get the many cost-saving anti-friction benefits of Moly in a grease formulated for their unique applications. This unique grease has superior extreme pressure and anti-wear characteristics in addition to all of the performance advantages of a calcium-based grease…in severe service applications, it provides a margin of safety unsurpassed by other fluid greases. These benefits mean lower overall lubrication costs, greater load handling capability, less maintenance and fewer equipment failures.

• Excellent all-temperature pumpability
• Superior resistance to water washout
• Moly reduces friction and heat
• Clings and penetrates to reduce wear
• Available in NLGI #000 and #00

SWEPCO 101 Moly Grease

A Premium Quality, Non-Melt, Multi-Purpose Grease Made With Technical Fine Grade Powdered Moly for Unexcelled Control of Wear, Friction & Heat.

SWEPCO 101 Moly Grease represents the “state of the art” in grease technology, combining superior base stocks and gelling agent with the proven performance of powdered moly and other highly effective additives.

Its advanced chemistry outperforms competitive “top of the line” greases in a number of important areas, including:

• Friction reduction
• Heat and wear control
• High heat and oxidation resistance
• Cold temperature performance
• Service life and lubrication cost control

For companies, equipment or service conditions that demand the best, there can be only one answer . . . SWEPCO 101 Moly Grease.

• Non-melt grease that will not melt at any temperature
• Contains the technical fine grade Molybdenum Disulfide (Moly Powder)
• Optimum performance range is -30°F to 500°F (-34°C to 260°C)
• Withstands up to 500,000 pounds per square inch of pressure
• Contains SWEPCO’s proprietary anti-friction and anti-wear additive, LUBIUM

SWEPCO 102 Organic Moly Grease

A premium quality organic moly grease that outperforms conventional greases in a number of ways, including :

• High heat resistance
• Cold temperature performance
• Friction reduction, wear control
• Oxidation resistance and service life

SWEPCO 102 is an outstanding value for maintenance of equipment that requires superior protection at a more economical price. Excels In High Heat Applications SWEPCO 102 is formulated with a suspension grade molybdenum-sulfur anti-friction compound (moly) that gives the base stock superior affinity for metal surfaces. This reduces friction well below levels encountered with conventional greases, significantly reducing heat and heat-related failures and providing corresponding increases in load carrying capability, operating efficiency and component life.

Features

• Non-melt grease with Molybdenum Dithophosphate (Liquid Moly) for less severe applications
• Liquid Moly gives base stock exceptional affinity for metal without actually plating out lubricated surfaces like Moly powder
• Heat and friction reducing properties are less than 101 Moly Grease, but much greater than conventional greases

SWEPCO 104 High Heat Grease

A premium quality multi-purpose high pressure gun grease with excellent thermal and chemical stability. It is especially formulated to provide superior lubrication under a variety of demanding operating conditions, including severe temperature extremes, heavy loads and abnormal exposure to moisture.

The broad range of protection provided by SWEPCO 104 makes it a superior multi-purpose lubricant, satisfying the requirements of at least five common gun grease applications and many special applications as well. By eliminating the need for stocking a variety of greases for specialized applications, SWEPCO 104 saves users money, as well as reducing the risk of misapplication of lubricants. These two features, superior lubrication and broad range application, provide users with true lubrication economy.